Taylormade Driver Adjustment Instructions

Posted onby
  1. Taylormade R7 Driver Adjustment Instructions

I have mine on standard neutral, ive corrected my slice somewhat so on closed it was drawing way to much on closed + i found myself shouting 4 left a lot, its fun to try all the settings on the range, when you find a setting that works keep it there, dont keep messing every time you hit bad shots or youll be messing your self up imo higher is 12. standard is 10.5. lower is 9. hope this helps. TaylorMade recommends starting your club adjustment with the loft sleeve. If you already know the loft of your old driver, this is an easy step – just set it to match your current club. Each turn of the dial will change the loft a half degree.

  1. The TaylorMade M3 Driver allows the player to adjust loft and sole weights, giving its user the freedom to customize the feel and performance to suit their p.
  2. Want to get the most out of your TaylorMade M2 driver? The Doc take you thorugh all the different adjustment options this driver gives you.Don't forget to su.

If you love golf, you are probably aware that taylormade drivers are specially designed to give you an enjoyable golfing experience. There are different types of taylormade drivers. But, when it comes to the M4 driver, it’s so much special for the speed, distance or accuracy you are going to have from this.

This excellent driver can be easily adjustable as per your requirement. Now, if you don’t know how to adjust taylormade M4 driver, I am here today to tell you about this. Stay with me throughout this article, and I will show you everything you need to know about this driver.


The specialty of M4 Driver

Not every driver comes with this versatility level to give you an accurate and straight shot every time. It comes with innovative face technology and will provide you with everything to hit the ball hard and score a good shot.


On top of that, the hammerhead slot of the driver will ensure the maximum distance. Besides, the massive 41-gram weight will provide you with extra flexibility by optimizing the center of gravity.

However, you can still adjust the shaft and change the loft. It will provide the driver with a perfect bias. Besides, you can also change the amount of spin it can create in every shot.

How to Adjust Taylormade M4 Driver Correctly

Adjusting an M4 driver is not rocket science at all. But, you must know all the basics to adjust the taylormade M4 driver conveniently. In this section of this comprehensive article, I explain the step-by-step process of M4 driver adjustment.

Opening the Shaft:

First of all, you have to open the shaft from the head. It’s a pretty much straightforward process. You can easily do this with the wrench, which comes with this golf M4 driver. You have to put the wrench on the screw and turn anti-clockwise to open it up. However, if you set the screw clockwise, it will tighten the screw. I believe you can easily open up the screw. After loosening the screw, you have to remove the head from the shaft very carefully. Now, notice carefully in the shaft, and you can see a couple of markings to provide you with different options with loft, lie, and face angle.

Standard Position:

Generally, a Taylormade M4 driver comes with a 4-degree tip adapter, which will allow you to adjust the loft up to plus or minus two degrees. For example, when setting up the shaft at the standard position, for a 9.5-degree driver, the loft will be 9.5 degrees. On top of that, you will also get the standard lie angle, which is 56 degrees, and the square face angle will provide you with extra flexibility.


Lower Position:

Now, you want to adjust the loft to the lower shaft position, right? Yes, with an M4 driver, you can easily do that. You have to attach the head at the lower area of the shaft. In this case, the loft will be reduced to 7.5 degrees. With 4 degrees more open face, you will get the lie angle to reach 58 degrees. Moreover, at this point, the driver will put 400 RPM less spin to the ball.

Higher Position:

On the contrary, you can also connect the head at the higher position of the shaft. At this position, you will get a loft size of 11.5 degrees. Now, you will get a face with four degrees close than the standard position. Moreover, to give you a unique result, the Taylormade driver will now increase the spin with 400 RPM, and you’ll get a perfect shot.

Incremental Adjustments:

Now, if you don’t want to set the shaft at a higher or lower position, you can easily do that. In this case, you have other available options too. You have to incremental adjustments. It is also a pretty much simple process.

You have to find the UPRT lie setting on the reverse of the shaft. You have to attach the head at this position of the shaft. It will keep the loft as stated on the head, but the club is now at 4-degrees upright.

How to adjust your TaylorMade M4 driver by DONAL HUGHES

Final Words

Taylormade R7 Driver Adjustment Instructions

Now that you already know how to adjust taylormade M4 driver, you can do it quickly. Besides adjusting to the shaft level, you can also make necessary changes in the head section to adjust the golf driver’s center of gravity. I want to conclude the article here by saying that if you follow these steps correctly, you can easily adjust the driver.