How To Update Firmware On Hp Procurve Switch

Posted onby
Switching

Update Hp Procurve Firmware Via Command Line

How to download Firmware / Boot ROM software for HP ProCurve switch 2520. Update HP ProCurve switch software via TFTP - Duration: 2:43. Jeremy Gaddis 102,816 views. Hp procurve firmware update console, The HP ProCurve Switch 2900 Series consists of two switches: the HP ProCurve Switch 2900-24G with 24 10/100/1000 ports and the HP ProCurve Switch 2900-48G with 48 10/100/1000 ports. Both have four dual-personality ports. Hp procurve firmware update console, Software updates: free downloads from the Web Stacking capability: single IP address management for a virtual stack of up to 16 switches, including the ProCurve 2500 series, 2600 series, 2800 series, 3400cl series, 6108, 6400cl series, and 4100gl series. Procurve/Aruba stacking doesn't offer in service software upgrades (ISSU) like Comware switches do, so yes both switches will need to be rebooted when you initiate the upgrade. The best way that I've found to do it is to TFTP the firmware and then issue a 'boot system' command to the master.

1. Firmware download1. Download firmware

Die neueste Firmware kann hier herruntergeladen werden http://www.hp.com/rnd/software/switches.htm

2. TFTP Server

Extract the downloaded file and use a TFTP Server http://www.mogilowski.net/2010/10/25/setting-up-tftp-server-on-ubuntu

Example:

3. Install new firmware

Create a telnet connection to the switch:

and copy the firmware to the switch:

Restart the switch with the new firmware with:

Hp Procurve Switch Firmware

Note: Replace „TFTP_SERVER_IP“ with the IP of your TFTP server, „SWITCH_IP“ with the IP of your switch and „I_10_77.swi“ with your firmware version.

4. Test

Check if the new firmware is installed:

5. Old versions

If your switch running a frimware lower than „I.07.68“ you frist have to patch with „I_07_68.swi“. After this update you can install „I_10_77.swi“. Both files are in the downloaded archive.