Cisco Asa Export Certificate

Posted onby
  1. Cisco Asa Export Certificate Private Key Cli
  2. Cisco Asa Software
  3. Cisco Asa Export Ca Certificate
  4. Cisco Asa Export Certificate Template

Use the procedure that follows to configure a router to obtain a certificate from your organization's Certificate Authority and use it to secure communications between the router and onePK applications.

Before You BeginExportCisco

Cisco Asa Export Certificate Private Key Cli

O Presence of Identity (ID) Certificate on Cisco ASA. Note: In this document, Cisco ASA means that the source ASA firewall which has the ID certificate that you want to migrate to your FTD device. O When you migrate the ID certificate from source ASA to target FTD, the PKCS#12format of the certificate. I have exported an existing certificate+key from an ASA 5510: asa5510(config)# crypto ca export MYTRUSTSTORE pkcs12 MYPASSWORD Saved the output in a file (vpn-cisco.pkcs12), and now I am trying to pull the cert and the key into separate files like so.

Install an SSL Certificate on Cisco ASA 5500 series Your very first step is to prepare all your SSL Certificate files. You should receive a ZIP Archive from your CA with the primary and intermediate certificates inside. Download and extract the SSL Certificate files. CSR Creation for Cisco Adaptive Security Appliance 5500. If you already have your SSL Certificate and just need to install it, see SSL Certificate Installation for Cisco ASA 5500 VPN. How to generate a CSR in Cisco ASA 5500 SSL VPN/Firewall. From the Cisco Adaptive Security Device Manager (ASDM), select 'Configuration' and then 'Device Management.'

How To export SSL Certificate from Cisco ASA (Cisco Adaptive Security Appliance) and install on a Cisco Wireless LAN Controller I. To install SSL certificate on WCL you need to create a.pem file that contains the full chain of certificates. Before you go to the next step you will need to.

Cisco Asa Software

Your router must be configured with a hostname, and it also must be configured to obtain network time from an NTP server. In Configuration Terminal mode, enter the following command if necessary:

Download
  • hostname<hostname for this router>

  • ntp server<IP address of NTP Server>

SUMMARY STEPS

Cisco Asa Export Ca Certificate

    1. enable

    2. configure terminal

    3. crypto pki trustpoint cert-name

    4.enrollment URI http://ca-server-ip-address-or-FQDN

    • If you want to be able to use FQDN, you must configure the router to use a DNS server.

    5.subject-name CN=fully-qualified-domain-name

    6.revocation-check none

    7.exit

    8. crypto pki authenticate cert-name

    9. crypto pki enroll cert-name

    10. onep

    11. transport type tls localcert cert-name [disable-remotecert-validation]

    12. CNTL/Z

    13.copy running-config startup-config

    14.configure terminal

    15.crypto pki export certificate-name pem terminal

    16.copy and paste


Cisco Asa Export Certificate Template

Cisco Asa Export CertificateCiscoDETAILED STEPS
Command or ActionPurpose
Step 1 enable
Example:

Enables privileged EXEC mode.

Step 2 configure terminal
Example:

Enters global configuration mode.

Step 3 crypto pki trustpoint cert-name
Example:

Prepares the router to obtain a certificate from the CA.

Step 4enrollment URI http://ca-server-ip-address-or-FQDN
  • If you want to be able to use FQDN, you must configure the router to use a DNS server.

Example:

Specifies the IP address and port of the CA.

Step 5subject-name CN=fully-qualified-domain-name
Example:

Specifies the domain name of this router. The domain name is transmitted to the CA and is used in the generation of the certificate.

Step 6revocation-check none
Example:

Ignores revocation-check.

Step 7exit
Example:

Exits CA configuration mode.

Step 8 crypto pki authenticate cert-name
Example:

Configures the router to obtain the certificate from CA.

Step 9 crypto pki enroll cert-name
Example:

Configures the router to enroll with the CA.

Step 10 onep
Example:

Enters onep configuration mode

Step 11 transport type tls localcert cert-name [disable-remotecert-validation]
Example:

Enables TLS on the router and configures the router to use the certificate you obtained from the CA. If you do not want to use bidirectional authentication, include the optional disable-remotecert-validation command.

Step 12 CNTL/Z
Example:

Exits global configuration mode.

Step 13copy running-config startup-config
Example:

Saves your changes to the startup configuration.

Step 14configure terminal
Example:

Enters global configuration mode.

Step 15crypto pki export certificate-name pem terminal
Example:

Displays the certificate in a format that can be copied and pasted into a text file. Note that you need to perform this step only once, after which you can share this same certificate with any network element that hosts onePK applications.

Step 16copy and paste

Copy the certificate from your terminal window and paste it into a text editor. Be mindful of the following:

  • You must copy precisely. If you include extra spaces or omit the BEGIN or END lines, your application cannot authenticate with the router.

  • When you save your text file, it must be appended with a .pem file extension.

Save the your .pem file to a location that is readable by onePK applications; details vary according to platform and the architecture of your network infrastructure:
What to Do Next

After completing this procedure, you can test your configuration. Go to Testing Certificate Installation to run one of the sample applications.